Thursday 16 October 2014

Unboxing Malifaux - M2E Slop Haulers

It's a dirty job but some-ones got to do it...

'Small Box' Cover.

The Slop Haulers box contains enough parts for two miniatures...namely the Slop Haulers. It also contains stat cards for them though there are no upgrade cards.

Slop Haulers - Sprue

Slop Haulers - Stat Cards (M2E)

Here are the official assembly instructions should you have trouble locating them. As is sometimes the case with Wyrds Instructions the numbers referred to in the instructions are different to the ones on the model sprue. I'll be using the ones listed on the sprue...

Slop Hauler 1 - Assembled
It's obvious just from looking at the pictures that those ropes on the buckets are rather thin and as they have a slight twist in them they're already slightly under tension so be careful when attaching them to the crossbar and when initially removing them from the sprue. There's room to attach the cloth piece on the rear of the models head after you've assembled everything else (at least there was on mine) so that can be put on last if your worried about knocking it off with the crosspiece.


Slop Hauler 2 - Assembled
This one has no real issues. The lower legs are separate but they have obvious location points and at least they're not just a tiny separate foot like on some of the Gremlin models...


Here's a group picture.

Here's a comparison picture including the original metal versions and another that also includes the limited edition 'Easter' version...

Thoughts and comments are (as usual) most welcome.

No comments:

Post a Comment

Related Posts with Thumbnails