Tuesday, 18 October 2016

Unboxing Malifaux - Big Jake

"I'm back...again..."

The Big Jake box contains enough parts for one miniature...namely Big Jake. It also contains a stat card for him though there are no upgrade cards.

Big Jake - Sprue
The box has one sprue in it as well as the aforementioned card. Here's pictures of both sides of it...

Big Jake - Stat Card
Wyrd Games didn't like my publishing pictures of both sides of the stat cards so you'll have to make do with this...

Should there be any assembly issues with the model then they will be listed in the appropriate section and you can view larger versions of the smaller pictures or instruction pictures by clicking on them.

Big Jake - Instructions
Currently can't find any instructions for this model but as soon as I find some they'll appear here.

Some General Notes on Assembly.
Many of these models contain quite small parts so depending on how dexterous you are you might consider getting yourself some tweezers. Dry-fitting is also always a good idea in case a part needs a tiny bit of extra filing or filling as some of the fits are quite tight. Where the parts on the sprue are quite thin (chains, weapon shafts, cables and the like) then it might be better to remove parts with a sharp scalpel rather than cutters.

Big Jake - Assembled
This model consists of only six pieces and is a fairly simple assembly job though both the hat and waist piece do have some delicate decorative pieces that you'll want to be careful with. The one piece of advice i'd give is to attach the decorative front piece first so you have something to attach the leg to.

Big Jake - Alternate View
There's no metal model or alternate sculpt to compare this one to so here's a nice rotational view instead.

Thoughts and comments are (as usual) most welcome.


  1. The advice to put on the decorative piece on the front first was really useful. Thanks.


Related Posts with Thumbnails